|
Davit set includes ... Standard rail mounts,
deck bases, 4:1 Harken® 40mm purchases with 3/8" line
| Bay II davit set.......... |
$ 1850.00 |
| Island davit set.......... |
$ 2350.00 |
| Winch upgrade (available in singles) |
940.00 each |
| Lengthen the lower end of the davits (Island Davits) |
300.00/pair |
Upper mount options:
| Standard Mount - 1-1/2"(35mm) or
5/8"(16mm) stand-off |
0.00 / pair |
| Custom Mount: Clamp 322.00 Caprail 545.00 Transom 338.00 Tubular 452.00 |
/ pair |
Base options:
| Deck base - 2½" (63mm) round or
1-1/2" x 3" (38mm) rectangular or
triangle (with offset pin) |
0.00 / pair |
| Mini - Extended or mini offset toerail base |
62.00 / pair |
| Extended toerail base (standard design) 220.00, (Custom design.) 340.00 |
/ pair |
| Transom base - custom bent ('L' type) |
142.00 / pair |
| Transom base - custom welded angle ( inverted 'L' type) |
238.00 / pair |
| Extended transom base - custom welded angle with up to 5" extension |
397.00 / pair |
Lifting tackle options:
| Credit for no tackle |
-388.00 / pair |
| 6:1 purchase upgrade with 40mm Harken Carbo blocks |
130.00 / each |
| Harken Carbo 57mm blocks upgrade |
4:1 cost 85.00 each, 6:1 cost 165.00 |
Davit stabilizing systems:
| Stainless Steel 'Fixed' stabilizer (often used with Solar panel risers - below) |
655.00 |
| Stainless Steel 'Slip-On' stabilizer (allows davits to rotate) |
660.00 |
| Single 1" (25mm) S/S cross tube for
wire or rope stabilizing (up to 65" span) |
250.00 |
| Single 1¼ '(32mm) S/S cross tube for
wire or rope stabilizing (over 65" span) |
340.00 |
Rail Reinforcing Systems:
| Heavy End Plates with welded loop |
100.00 / pair |
| Rail support straps - S/S bar type |
460.00 / set |
| Tubular ail supports - 1" tube (1-1/8" or 1-1/4" tube - add 50.00 /set) |
550.00 / set |
Accessories:
| Davit cam cleat assembly |
140.00 / pair |
| Flag Socket for SS100 or Slip-On - 3/4" ID or 1" ID or 1-1/4" ID |
135.00 each |
| Secure-It stainless steel ratchets (with 12' of Dacron webbing) |
182.00 / set |
| Solar panel risers for SS 100 stabilizer |
545.00 / pair |
| Solar panel risers for Slip-On stabilizer |
440.00 / pair, diagonal braces 235.00 |
| 1" x 14ga T316 tubing for (Slip-On type) solar panel mounting |
24.60 / foot |
| 1" x 2" anodized rectangular tube (for building panel framing) |
21.10 / foot |
| Stern light mounting plate |
148.00(SS100 model), 167.00(Slip-On) |
Shipping (via UPS
- Ground within USA, excluding Hawaii and Alaska): Davits $225.00 and Stabilizers
$77.00 (82" or less)
Prices effective as of May 2,2022.
Subject to change without notice. |
